IMPORTANT SAFETY RECALL
Regarding: Kuat Pivot v3 Swing Away racks (Models PV3P20B and PV3D20B)
Dear Kuat Customer,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
REASON FOR RECALL:
Kuat Innovations has determined that a defect which relates to motor vehicle safety exists in our Pivot v3 Swing Away Hitch Racks manufactured from January 25, 2026 to September 10, 2026. Material fatigue or failure between the hitch tube and rear cross beam may occur under certain load conditions. Under certain load conditions, a section of Pivot v3 material may stretch and crack where the hitch tube and cross beam connect via weldment causing the pivot to sag and rest on the pivot hitch tube. If the condition remains undetected or with continued use the cross beam has potential to separate and create a road hazard, increasing the risk of a crash, property damage, or injury to following vehicles. Küat requests that you stop using these racks immediately.
Please carefully inspect your rack to determine if it is one the units affected by this recall. The Batch Number of the affected Pivot v3 racks range from 2605 through 2627. The figures below will assist you in identifying the Batch Number of your rack, which is the first group of numbers following the Küat model (PV3P20B or PV3D20B) of your serial number. The sticker with your product’s serial number is located on the top of the shank near the point where the shank and pivot arms meet, as indicated in Figure 1. The Batch Number of your unit is the first group of numbers of your serial number, as indicated in Figure 2. When inspecting an unopened box of the Pivot v3, the product’s serial number is located on the end of the box, as indicated in Figure 3.
We will provide you, free of charge, with an updated Pivot v3 to remedy this issue.
To obtain your free replacement Pivot v3, please go to https://kuat.com/pages/pivot-v3-recall-2026 and follow the instructions for submitting information, or call the Kuat Customer Service Team toll-free at 1(877) 822‐5828.
Please submit one form for each Pivot v3 you own, and include your serial number or a photo of your Pivot v3 if possible. Proof of purchase is not required. We will review your submission and contact you with next steps.
Your affected Pivot v3 rack must be destroyed so it cannot be repaired, resold, or reused. The recommended method is to cut completely through a major structural section of the Pivot v3, then send us photos showing the entire rack and the cut. Disassembling the rack or removing parts does not qualify since the rack can be put back together and potentially used. Only do this if you have the proper tools and can do it safely. If you cannot, contact us before taking any action and we’ll help facilitate other options.
Once we have verified that your affected Pivot v3 has been removed from service, we will create your no-cost replacement order and email you a confirmation. Your replacement will ship as soon as the updated Pivot v3 is available. The replacement racks will be available for shipment starting December 18, 2026.
Please do not return your Pivot v3 to Küat unless our Customer Service Team asks you to. If this occurs, you will not need to pay for any packaging or shipping costs.
You may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave. SE, Washington DC 20590, or contact the Vehicle Safety Hotline at (888)327‐4236; (TTY: 1(800)424‐9153); or go to www.safecar.gov, if you believe that we have failed or are unable to remedy the defect without charge within a reasonable time.
If you have incurred any cost for remedies in advance of this notification, please contact the toll free number listed above for reimbursement. Reasonable supporting documentation will be requested.
Kuat apologizes for any inconvenience this causes. This voluntary recall reflects our commitment to ensure the safety and satisfaction of our customers.
